Automotive Manual, Car Parts and News

Dodge Nitro Subwoofer Installation
1. Find the fuse block under the hood and open the fuse box cover.
2. Using a 13mm socket and ratchet loosen and remove the fuse box power supply nut. Fig. 1
3. Connect the ring terminal of the power harness to the fuse box power lug and retighten the nut.
4. Route the wire […]

[Read more →]

Dodge Caliber, Jeep Compass Subwoofer Installation
1. Lift up on the B pillar post cover and then pull it towards the center of the car to remove.
2. Using a panel removal tool gently pry up the threshold/kick panel along the bottom of the front and rear door openings to release fasteners and remove panel.
3. Find the […]

[Read more →]

1. Mounting the V-Force Computer
Using the supplied Velcro, locate the V-Force in a convenient location under the dash by removing the backing from the Velcro and pressing firmly to ensure a good contact.
TIP: Clean the mounting area with alcohol or another nonabrasive cleaner to ensure the Velcro adheres properly.
2. Disconnect the Negative Battery Cable
Locate the […]

[Read more →]

Read and understand these instructions BEFORE attempting to install this product.
1) Removing the Stock Engine Control Unit a) Access the stock Engine Control Unit (ECU). The 240SX ECU is found behind the passenger-side kick panel. All other Nissan engine control units are found on the floor in front of the center console.
b) Carefully disconnect the […]

[Read more →]