FITTING YOUR BOV 300ZX ADAPTOR
Note: Please thoroughly read and understand both these instructions and the fitting instructions supplied with your BOV before commencing this installation.
Step 1. Locate the two boost hoses.
Step 2. Loosen the factory hose clamps securing the boost hoses to the intercooler pipe and throttle body.
Nissan 300ZX Atmo Blow-Off Valve Adaptor Instructions
December 19th, 2010 · No Comments
1995-99 Mitsubishi Eclipse GST/GSX PowerMax Turbo Upgrade: XS21-0100
September 19th, 2010 · No Comments
Installation
Please follow the directions below carefully, making sure to perform each step in its listed order. We would like to stress to you that, when the directions call for you to remove or install any of your vehicle’s factory components, you must follow the instructions given in your factory service manual.
1. Remove the factory turbocharger [...]
Nissan 300ZX Blow-Off Valve Adaptor Instructions
November 14th, 2009 · No Comments
FITTING YOUR BOV 300ZX ADAPTOR
Note: Please thoroughly read and understand both these instructions and the fitting instructions supplied with your BOV before commencing this installation.
Step 1. Locate the two boost hoses.
Step 2. Loosen the factory hose clamps securing the boost hoses to the intercooler pipe and throttle body.
Step 3. Loosen the factory hose clamps securing [...]
BMW M3 E46 2000 – AA Exhaust Cat-Back System Instructions
October 11th, 2009 · No Comments
The AA cat back exhaust system is a fine exhaust system that will deliver a deeper sound, increased torque and horsepower. Many hours of design, testing and fitting were conducted for a clean fit and finish.
Locate the 6 pins that hold the rear valance along the back side lower edge. Remove them so that the [...]
