Automotive Manual, Car Parts and News

Installation Instructions: Solid Bench Seat
Step One: Tilt the back of the rear seat forward. Remove jack handles from current plastic tray (if applicable). Using an 8mm socket remove bolts holding current plastic tray. Remove tray from truck. If you experience problems removing bolts you may need to apply upward pressure from under tray.
Step Two: Set […]

[Read more →]

Procedure: (Approximate time to complete installation: 3 - 4 hours)
A. Removing the Door Panel Coverings
1. For ease of installation, do both sides at the same time.
2. Roll the windows to approximately 1/2 open, and so the crank handle is in the Down Position. With either the Crank Spring Removal Tool, or a flat Screwdriver, remove […]

[Read more →]

Getting started
- Chock the other 3 wheels on both sides
- Release handbrake
- Put the gearbox into neutral
- Loosen wheel nuts
- Jack up the car
- Remove wheel nuts + wheel
- Place jack-stand under car for safety

[Read more →]

ere’s how to convert a Saginaw Type II (or TC) power steering pump from an attached reservoir to a remote reservoir. This conversion may be necessary if you’re using our Kwik Performance driver’s side bracket kit. Why do you need our bracket kit at all? Most likely for three reasons:
1. You have a Camaro, Firebird, […]

[Read more →]

Congratulations! You have purchased the finest street Supercharger available for the 2002 5.9L Dodge Ram 1500. The centerpiece of this kit is the highly efficient and reliable Paxton Automotive Corp. NOVI-2000 supercharger. A mechanically driven (by belt) centrifugal blower (supercharger). This kit comes with all of the parts you’ll need for a successful installation. The […]

[Read more →]

Acura TSX Figure Grille Installation
1) Remove the OEM fog light grilles, if this item was purchased. The stock fog light opening covers are held in place with spring clips attached to the cover. Work a finger between the cover and the bumper, and pull outward to release the cover.
2) The lower center grille is not […]

[Read more →]