Automotive Manual, Car Parts and News

FRONT OF VEHICLE
1. Park vehicle on level concrete surface.
2. Center and lock the steering wheel.
3. Block the rear wheels of the vehicle to prevent vehicle from moving in either direction.
4. Remove the upper track bar bolt using an 18mm socket and save bolt for later reinstall. See Figure A.
5. Remove the lower front shock bolts […]

[Read more →]

FRONT OF VEHICLE
1. Park vehicle on level concrete surface.
2. Center and lock the steering wheel.
3. Block the rear wheels of the vehicle to prevent vehicle from moving in either direction.
4. Remove the upper track bar bolt using an 18mm socket and save bolt for later reinstall. See Figure A.
5. Remove the lower front shock bolts […]

[Read more →]

FRONT OF FRONTIER
1. Park vehicle on level concrete surface.
2. Center and lock the steering wheel.
3. Block the rear wheels of the vehicle to prevent vehicle from moving in either direction.
4. Jack up the vehicle from the lift point in Figure A.
5. Support the vehicle with jack stands from the points in Figure A.
6. Remove the […]

[Read more →]

FRONT OF XTERRA
1. Park vehicle on level concrete surface.
2. Center and lock the steering wheel.
3. Block the rear wheels of the vehicle to prevent vehicle from moving in either direction.
4. Jack up the vehicle from the lift point in Figure A.
5. Support the vehicle with jack stands from the points in Figure A.
6. Remove the […]

[Read more →]

The Steering Wheel Interface (SWI) will control most aftermarket head units with an infrared remote by still utilizing the factory steering wheel radio control buttons. The SWI has non-volatile memory which can store from between 1 to 17 functions from the steering wheel and wireless remote. *The SWI interfaces will only work with infrared remotes […]

[Read more →]

Preparation
1. Cover the front seats, floorboards, dash and steering wheel with a clean drop cloth or disposable plastic covers.
Note: Always wear eye and hand protection when working with glass. Make sure you have the right glass and moldings and the urethane systems are current. Windshield part numbers are FW2464 and FW2461.
2. Drape the fender with […]

[Read more →]

1. Install one Miata Lo-Pro Headlight con- version at a time starting with the Drivers side first. Please note that when “Right” or “Left” is mentioned, it is referenced from behind the steering wheel. With the headlights and the hood in the UP position remove the black plastic mask by removing the four phillips (cross) […]

[Read more →]

CNNmoney.com named the 2009 Suzuki SX4 Crossover one of the Ten Great First Cars. Two rea- sons for the ranking are likely to be: the quality of car you get for such a low price, and the great mileage you get while driving. Recently in my driving demonstration, I got 22 mpg in the city […]

[Read more →]

Important 5″ LCD Installation Information:
1) When mounting the LCD be sure to avoid placing the monitor in the path that impedes driver’s ability to drive vehicle safely.
2) Locate a fused accessory power circuit and attach the Black/White Stripe lead of the 2 Female Harness Pig Tail from the Sack Part using In-Line IDC connector..
3) Locate […]

[Read more →]

This is the outline of my installation of a Tekonsha Prodigy brake controller into a 2001 3.0 5sp X5.
I opted to install the Prodigy in the console ashtray. It’s in front of the shifter and relatively easy to reach the manual brake lever – it’s just a little tough to reach in 1st and 3rd […]

[Read more →]