Automotive Manual, Car Parts and News

The recommended push beam height for this undercarriage assembly is 10-1/2” from the center of the push beam to level ground. DO NOT exceed 12-1/2” in height for this undercarriage.
1. Remove the bumper support brackets from the outside of the truck frame. Discard original hardware.
2. Using the access holes in the truck frame under the […]

[Read more →]

The front fascia and tie down brackets are removed for baseplate installation. Tie down brackets will not be reinstalled. No drilling necessary. The BX8869 is available for the vehicle. Attachment Tabs are 22 inches center to center and a height of 15 5/8 inches.
1. Remove two phillips screws from under fascia corner, just forward of […]

[Read more →]

The front fascia, lower grill, and tie down brackets are removed for baseplate installation. Lower grill will need to be trimmed or left out. Tie down brackets will not be reinstalled. No holes need to be drilled. The BX8869 is available for the vehicle. Attachment Tabs are 20 inches center to center and a height […]

[Read more →]

Position the trailer on a stable and LEVEL working surface. If possible, leave the tow vehicle hooked to the trailer in order to limit movement as well as keeping the front end supported and level. If the trailer is not supported on the tow vehicle, it MUST be blocked directly to the ground at the […]

[Read more →]

This publication contains instructions for the proper method of loading and securing Volkswagen and Audi vehicles. Methods other than described and illustrated are not acceptable.
1. To ensure receipt of the proper vehicle, all Volkswagen/Audi vehicle identification numbers (V.I.N.) are located on the dashboard visible through the driver’s side lower windshield.
17 digit V.I.N. number – example […]

[Read more →]