INSTALLATION
1) Disconnect the vehicle’s negative battery cable.
2) Loosen the hose clamp where the rubber intake hose connects to the mass-air sensor.
3) On some vehicles with a manual transmission;you may need to unhook the vacuum pipe from the rubber hose junction.
4) Carefully remove the electrical plug connection from the mass-air sensor.
5) Unclip the airbox lid. Remove […]
1991-1999 Mitsubishi 3000GT Air Intake Kit Installation Guide
September 21st, 2009 · No Comments
Mitsubishi 3000GT VR4 and Dodge Stealth RT/TT PPE Engineering Front Mount Intercooler Pipes
September 21st, 2009 · No Comments
Pre-Installation:
1. Remove all stock intercooler pipes and intercoolers (Refer to Factory Service Manual for removal instructions)
2. Install Front Mount Intercooler. (Refer to FMIC installation section)
3. Unbolt Oil Cooler and move forward at least one inch.
a. Remove upper bracket
b. Bolt lower hole to existing hole where factory intercooler was.
c. Mark hole for upper side bracket hole
d. […]
Search engine terms: 1993 mitsubishi 3000gt cold air intake, 1993 mitsubishi 3000gt stock intake, air intake assembly 1991 ford probe, oil filter fitting adapter 3000gt, how to remove stock MAF of 3000gt, How to install cold air intake mitsubishi 3000gt, 3000gt pipe with metal bit in, 1991 3000gt vr4 MAF part number, how to install a intake on a 3000gt, 1992 3000gt intake filter adaptor, vacuum pipe diagram for 3000gt, install k and n air filter vr4, drycharger 3000gt, , 3000gt radio installation adapter, 3000gt removing air box, how to install cold air intake 3000gt, automotif mitsubishi 1991, filter adaptor for 3000gt, mass intake sensor for 3000gt vr4,
