V30 User Manual instructions
Please read this user manual carefully before using the scanner. The current user manual is based on the current features and functions available. Any new added features and functions of V30 Diagnostic Computer will be added to the user manual in the future. Updated versions of user manual will be available to download at AUTOBOSS website (http://www.autoboss.net).
When reading the manual, please pay special attention to the words “Note”, “Caution” or “Warning”, read them carefully for appropriate operation.
V30 Diagnostic Computer main unit maintenance:
Avoid shaking or dismantling as it may damage the internal components;
Do not use hard or sharp objects to touch the LCD screen; do not use excessive force; do not expose the screen to strong sunlight for a long period;
Caution: keep it away from water, moisture, high temperature or very low temperature;
If necessary, calibrate the screen before testing to ensure the accuracy of LCD performance;
Keep the main unit away from strong magnetic fields.
For safe operation please follow the instructions below;
Keep the scanner away from heat or fumes when using it;
If the vehicle battery contains acid, Please keep your hands and skin or fire sources away from the battery during testing;
Exhaust gas of vehicle contains harmful chemicals, please ensure adequate ventilation;
Do not touch the cooling system components or exhaust manifolds when engine is running ue to the high temperatures reached;
Make sure the car is securely parked and the selector is at P or N position to prevent the vehicle from moving when engine starts;
Make sure the (DLC) diagnostic link connector is ok before starting the test, otherwise the scanner may be damaged. Autoboss suggests you test the Power/Earth with Multimeter first; Do not switch off the power or unplug the connectors during testing, otherwise you may damage the ECU or scanner.